Paver Services in the Bay Area
Quartz Construction & Demolition installs pavers throughout the Bay Area, licensed under CSLB #1003436. We work with concrete and natural-stone pavers on three kinds of projects: new driveways, patios and other outdoor-living surfaces, and walkways or general paver installation. Every job follows the same core process regardless of where the pavers go – excavate and grade the base, compact a gravel sub-base, screed bedding sand, set the pavers to pattern, cut and set the border, then compact and (where called for) seal the finished surface.
Choose the Right Paver Service
Pavers get used for different parts of a property, and each one has its own access, load, and drainage considerations. Pick the project that matches what you’re building:
Replace or upgrade a concrete or asphalt driveway with interlocking pavers set over a compacted base built to carry daily vehicle loads.
See driveway pavers →
Paver patios and outdoor-living surfaces for entertaining, seating areas, and pool surrounds, graded so water drains away from the house.
See patio pavers →
Walkways, pathways, and general paver installation for any area that isn’t a driveway or patio – from a front walk to a side-yard path.
See paver installation →
Where We Install Pavers
We’re based in Concord and work on paver projects across the Bay Area. Central Contra Costa: Concord, Clayton, Pleasant Hill, Walnut Creek, Lafayette, Orinda, Moraga, Alamo, Danville, Blackhawk, and San Ramon. Tri-Valley and East Bay: Dublin, Pleasanton, Livermore, Castro Valley, Hayward, San Leandro, Alameda, Union City, Fremont, and Newark. South Bay and Peninsula: San Jose, Santa Clara, Sunnyvale, Mountain View, Los Altos, Palo Alto, Stanford, Menlo Park, Redwood City, San Carlos, Belmont, San Mateo, Foster City, Burlingame, Milpitas, Campbell, Los Gatos, Saratoga, and Cupertino. Not sure if we cover your address? Ask when you request a quote.
Frequently Asked Questions
What’s the difference between driveway pavers, patio pavers, and paver installation?
They’re the same paver materials and base-prep process applied to different parts of a property: driveway pavers are built to carry vehicle loads, patio pavers cover outdoor-living and entertaining areas, and “paver installation” covers walkways, paths, and other general paver work. See the project cards above for each.
Are pavers better than concrete for a driveway or patio?
Pavers are set as individual interlocking units, so a damaged or stained section can be lifted and replaced without the patching or color mismatch a poured-concrete repair usually leaves. They also flex slightly with minor soil movement instead of cracking in one spot. Poured concrete is a single continuous surface. Both need a properly prepared and compacted base to perform well over time – we can walk through which fits your project during a site visit.
How much does paver installation cost in the Bay Area?
Cost depends on square footage, material (concrete versus natural stone), pattern complexity, base depth and soil conditions, and site access. See our paver installation cost guide for the full breakdown, or request a free quote.
How do I maintain pavers after they’re installed?
Resweep or top off the joint sand periodically, especially after heavy rain, re-level any paver that settles, and reseal every few years to help resist staining and joint weeds. Sweeping leaves and other organic debris off promptly also helps prevent staining.
Do you install pavers throughout the Bay Area?
Yes. We regularly work in Central Contra Costa, the Tri-Valley/East Bay, and the South Bay/Peninsula – see the full list above, or ask when you request a quote if you’re not sure your address is covered.
Get My Free Paver Installation Quote